====== PV 003 DF Bearing Indicator======
**Direction finding bearing indicator PV 003**; manufactured by [[Rohde & Schwarz]].

The **PV 003** direction finding bearing indicator was used in the [[ULPE|PV004]] (resp. [[ULPE]]) and [[P-728|PV003]] (resp. [[P-728]]) of the Swiss Army.

{{:images:p-728-rohde-pv003-b.jpg?direct&600|Bearing display unit PV 003}}
===== Technical data =====
  * Principle]]: Direction finding bearing display unit
  * [[Operation modes]]: 
  * [[Frequency range]]:

==== Power supply ====
  * [[Mains operation]]: 220 V

==== Dimensions ====
  * mm, kg

==== Accessories ====

{{:images:p-7xx-ulpe-sichtgeraet-pv003.jpg?direct&600|Peilsichtgerät PV 003}}
===== Operation =====
The **PV 003** direction finding bearing indicator was used in the [[ULPE]] (here installed in a 19" cabinet) and [[P-728]] (here installed in an EDAK aluminium case) of the Swiss Army.

It can be used by the [[Rohde & Schwarz]] [[ESUM]] and [[ESM2]] receivers.

===== Technical principle =====
Bearing indicator using a round CR tube, digital display of the bearing after manual alignment of the bearing ruler.

==== Tube assembly ====

==== Development ====
The **PV 003** DF bearing indicator from [[Rohde & Schwarz]] was developed at the end of the 1960s.

==== Use ====
In the Swiss Army, the **PV 003** DF bearing indicator was used in the [[ULPE]] direction finding systems (here installed in a 19" cabinet) and [[P-728]] (here installed in an EDAK aluminium case).

{{gallery>:images?p-7xx-ulpe-sichtgeraet*.jpg&0&80x80&lightbox&showtitle&titlesort}}

===== Technical documentation =====

==== Further information ====