Direction finding bearing indicator PV 003; manufactured by Rohde & Schwarz.

The PV 003 direction finding bearing indicator was used in the PV004 (resp. ULPE) and PV003 (resp. P-728) of the Swiss Army.

• Principle]]: Direction finding bearing display unit
• Operation modes:
• Frequency range:

• Mains operation: 220 V

• mm, kg

The PV 003 direction finding bearing indicator was used in the ULPE (here installed in a 19„ cabinet) and P-728 (here installed in an EDAK aluminium case) of the Swiss Army.

It can be used by the Rohde & Schwarz ESUM and ESM2 receivers.

Bearing indicator using a round CR tube, digital display of the bearing after manual alignment of the bearing ruler.

The PV 003 DF bearing indicator from Rohde & Schwarz was developed at the end of the 1960s.

In the Swiss Army, the PV 003 DF bearing indicator was used in the ULPE direction finding systems (here installed in a 19“ cabinet) and P-728 (here installed in an EDAK aluminium case).