Benutzer-Werkzeuge

Webseiten-Werkzeuge


en:se-106

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen Revision Vorhergehende Überarbeitung
en:se-106 [2018/11/05 19:42]
mb
en:se-106 [2018/11/05 20:05] (aktuell)
mb
Zeile 49: Zeile 49:
  
 ===== Technical Principle ===== ===== Technical Principle =====
-{{:​images:​se-105-p5-geraet-chassis.jpg?​direct&​400|}}\\  +{{ :images:se-106-p5f-blockschaltbild.jpg?​direct&​300|}} In the transceiver chassis, the transmitter is placed on the right and the receiver unit on the left side.\\ ​
-In the transceiver chassis, the transmitter is placed on the right and the receiver unit on the left side.\\ ​+
  
 In the transmitter,​ there is an oscillator ([[de:​1E7G]]),​ a frequency doubler stage ([[de:​1E7G]]) and two RF output valves ([[de:​CB220M]]). The set has plate modulation, the two modulator valves ([[de:​CB220M]]) supply enough output to modulate the plate voltage. Valve V6 ([[de:​1E7G]]) acts as microphone amplifier, valve V7 as audio frequency oscillator for the modulation in [[A2]] mode. In the transmitter,​ there is an oscillator ([[de:​1E7G]]),​ a frequency doubler stage ([[de:​1E7G]]) and two RF output valves ([[de:​CB220M]]). The set has plate modulation, the two modulator valves ([[de:​CB220M]]) supply enough output to modulate the plate voltage. Valve V6 ([[de:​1E7G]]) acts as microphone amplifier, valve V7 as audio frequency oscillator for the modulation in [[A2]] mode.
en/se-106.txt · Zuletzt geändert: 2018/11/05 20:05 von mb